WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch
WiFi Test Tool ESP8266 Development Board Deauther Watch

WiFi Test Tool ESP8266 Development Board Deauther Watch

Regular price $94.95 Sale price $54.96
Unit price  per 

  • Shipping>>Standard Shipping, Express Shipping, Free Shipping over $ 40
  • Handling time>> New products shipped within 3 days

Deauth the WiFi!

A deauther allows you to disconnect devices from a WiFi network. Even if you're not connected to that network. Deauthers take advantage of a weakness in the 802.11 protocol which allows the sending of deauthentication frames by unauthorised devices.

Deauthers come with other features such as Beacon Spamming (spamming WiFi network names) and Probe Spamming.

Our deauthers are not WiFi Jammers, though they have a similar effect

What is it?

Deauther Watch is an ESP8266 development board, but you can wear it like a smartwatch.
This ESP8266 development board comes with a 500mAh lithium battery, OLED display and a 3-way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

⚡ Kick devices off a WiFi network

☎  Deauthers come bundled with other features

☢ Target an entire network or just specific devices

۞ Control your deauther with any WiFi device

✈ Deauthers are not jammers. Jammers are indiscriminate. Deauthers allow you to test hardware without affecting neighbouring networks.

✐ Deauthers may only be used on hardware you own or have permission to test

 

Note:

Only support 2.4GHz
DSTIKE Deauther Watch and ESP32 Watch share the same screen board, but pinmap and breakout pads are different!

What makes it special?

➤Only ~80mA power usage
➤Up to around 7 hours work time
200 mA charging current
➤Indicate charging LED (Red means charging, off means full)
➤Included 8dB antenna and 2dB antenna
➤Power Switch (Strongly recommend turn it off when charging)
➤Protection: short, overcharging, over discharging, temperature

GPIOs and Hardware Info:
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
High Light LED: GPIO 16
Side Button: GPIO0, GPIO2, RST



Usage:
1.You can use it with display and buttons:
https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-Buttons
2. You can also connect to "pwned" with the password "deauther" and use the web interface:
https://github.com/spacehuhn/esp8266_deauther/wiki/Web
3. If you lost the password you can reset it:
https://github.com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset.

ESP32 Bluetooth WIFI Kit

WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / n HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for development environment.

Operating voltage: 3.3V to 7V
Operating temperature range: -40 ° C to + 90 ° C
Supports Sniffer, Station, softAP and Wi-Fi Direct modes
Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to - 98 dBm
UDP continues to throughput by 135 Mbps

 


Package Including:
1 * ESP8266 WiFi Deauther Watch with 3D Printing Case and 500mAh lithium battery (Assembled)
1 * 2db Antenna
1 * 5db FPC Antenna

  • Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. Use Manual and Video: https://drive.google.com/file/d/19oeOZ2BApy06QAghJnAYH7FmPXKMon8h/view. Usuage: Using it only for testing and educational purposes against your own devices!
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only!
  • Long Working Time: Built-in an 500mAh lithium battery, working time up to 7 hours. Comes with OLED display and a 3 way momentary slide switch.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate.
  • Disclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws.

Our product is the same as these pictures. If you do not like when you get, we can give you refund anytime.

SHIPPING

We ship to 127 countries, including US, CA, AU and all countries in Europe.
5 days needed to US, CA, AU and 7 days to Europe.
AFTER-SALE SERVICE
Dear Customer, purchase any product here and try it in the comfort of your own home for 14 days.
If for whatever reason you're not completely satisfied, then return the product within 14 days!

OUR GUARANTEE

📦 Insured Worldwide Shipping: Each order includes real-time tracking details and insurance coverage in the unlikely event that a package gets lost or stolen in transit.

💰 Money Back Guarantee: If your items arrive damaged or becomes defective within 14 days of normal usage, we will gladly issue out a replacement or refund.

✉️ 24/7 Customer Support: We have a team of live reps ready to help and answer any questions you have within a 24 hour time frame, 7 days a week.

🔒 Safe & Secure Checkouts: We use state-of-the-art SSL Secure encryption to keep your personal and financial information 100% protected.

PAYMENT

PayPal is welcomed here.
If you don't have a PayPal account, we accept all credit cards: just select 'PayPal' and click the 'Pay with Debit or Credit Card' button.